User's Manual

701P41358
February 2004
XPPS 3.7.5x
6
Caveat Applicable printer Applicable
Client
platform
Faulted jobs will display as held in the queue list. All DocuSP
Web
Interface
The "Print" button will intermittently not function when trying to
send a job from the client. The print button will depress as
normal, but the client does not send anything to the controller. If
this happens, refresh the page using the browser's Refresh
button.
All DocuSP
Web
Interface
When there are many jobs in the queue, the administration page
may stop reporting jobs sent to the controller. After deleting
enough jobs in the queue, the administration page may start
functioning correctly again. The correct view will be at the Printer
controller.
All DocuSP
Web
Interface
Pre-printed stock type is not available in the media-type drop
down. If the client needs a pre-printed stock, it is available in the
XDS Plus applet.
All DocuSP
Web
Interface
The halftone mapping is as follows:
low frequency dot maps to "150 Dot"
mid frequency dot maps to "200 Dot"
mid frequency line maps to "200 Line"
high frequency line maps to "300 Line"
highest frequency line maps to "600 Line"
DocuColor 2045
DocuColor 2060
DocuColor 6060
DocuSP
Web
Interface
The halftone mapping is as follows:
low frequency dot maps to "141 Dot"
mid frequency dot maps to "170 Dot"
high frequency dot maps to "212 Dot"
stochastic maps to "Stochastic"
DocuColor iGen3 DocuSP
Web
Interface
Do not use the exit command with the Xerox Command Line
when in multiple command mode as it will hang. Instead, use
the 'X' on the top right corner of the window to close the console
window.
All XDS
Command
Line