User's Manual

701P41358
February 2004
XPPS 3.7.5x
7
Caveat Applicable printer Applicable
Client
platform
If the Xerox Command Line hangs and needs to be restarted,
enter Multiple command mode again. Use the following
commands:
set -p <printer>set -jt <job ticket>
set -f <file to be printed>
print
All XDS
Command
Line
The XDS Command Line does not submit a job when there is a
printer in the discovery file that is not running the IPP Gateway.
Remove or hide the printer that is not supported from the Printer
Registration file using the XDS Printer Registration application.
All XDS
Command
Line
Do not program an image shift greater than 12x12 inches in the
driver.
DocuTech/DocuPrint
65/75/90
Windows NT
When using the Microsoft PostScript driver with Xerox INF files
for Windows NT, stitched jobs do not print as expected when
duplex tumble is selected. Program the finishing option at the
printer.
DocuTech 61xx
DocuTech/DocuPrint
65/75/90
Windows
NT/2000
Programming uncollated output with the Microsoft PostScript
driver with Xerox INF files for Windows NT will result in collated
output. Program the collation at the DocuSP controller or use a
queue override.
DocuTech 61xx
DocuTech/DocuPrint
65/75/90
Windows
NT/2000
Drivers do not include Windows 2000-specific functionality (e.g.
ICM & JPEG).
All Windows
2000
Do not rename the printers. If a user wishes to rename a printer,
it must be renamed immediately after the printer is installed
(before printing or viewing printer properties). If a printer is
renamed, the job ticket settings will be lost when printing with
the Xerox customized PostScript driver.
All Windows
95/98/ME
Do not use the "Save In" field when selecting Save or Print and
Save. All files will be saved in the default save directory on the
controller.
DocuTech 61xx
DocuTech/DocuPrint
65/75/90
DocuColor 2045
DocuColor 2060
DocuColor 6060
DocuColor iGen3
Windows
95/98/ME
Only use Stock 1 and Stock 2 paper sizes when programming
exception pages or multiple inserts.
All Windows
95/98/ME