User's Manual

Job ticket options
Guide to Printing Using Xerox Production Print Services 9-17
To specify an ordered stock: If your custom stock
type is an ordered stock, select the [Ordered] check
box to display the [Order Count] field. Enter an order
count of 1 to 100.
Specifying a stock name
In the [Name] text box, enter a name for your stock. The
name may have up to 255 characters.
Specifying the stock weight
In the [Weight] field, enter the stock weight in grams per
square meter (g/m
2
).
Specifying drilled paper
To indicate whether the stock for your print job has drilled
holes, select [Drilled] or [Not Drilled] from the pop-up menu in
the [Drilled] field.
Specifying coating/finishing
In the [Sides Coated] field, you can indicate which side
coating is on. You can select One Side, or Two Sides.
In the Coating Type section, select the type of coating that is
on that side of the stock.
In the finishing field, select what surface the coating is
applied to. Select Smooth, Regular, or Rough.
Specifying covers
The Covers dialog box enables you to specify covers and to
select different paper stock and printing options for a front
cover, a back cover, or both for the job.
Specifying front cover or back cover only
You can add just a front cover or a back cover to the print job.
Follow these steps to add one cover and to select the printing
options:
1. Select the [Covers...] icon on the Job Ticket dialog box.
The Covers dialog box opens.
2. Select [Front Only] or [Back Only] from the Covers pop-up
menu. The [Stock] and [Printing on] fields are displayed.
3. From the Stock pop-up menu, select the stock number for
the cover. The properties for the stock that was previously
specified for that number are displayed in the [Stock] field.