User's Manual

Job ticket options
9-18 Guide to Printing Using Xerox Production Print Services
4. If you want to select a different stock ID or specify
different properties for the stock number, select the
[Stocks...] icon to open the Paper Stocks dialog box.
a. On the Paper Stocks dialog box, select the same stock
number from the Stocks menu that you selected on the
Covers dialog box.
b. Program the stock for the cover. Refer to “Specifying
stocks for the job” and “Specifying stock properties,”
earlier in this chapter, for further information.
c. Select [OK] to close the Paper Stocks dialog box and
return to the Covers dialog box.
5. Select the sides of the cover that will be printed. The
available options are [None], [Side 1], [Side 2], and [Both
Sides].
6. Select [OK] to save the covers programming and return to
the Job Ticket dialog box. The type of covers that you
specified is displayed below the [Covers] icon on the Job
Ticket dialog box.
If you want to remove the covers programming, select
[Cancel].
Specifying both front and back covers
You can add both a front and a back cover to the print job.
Follow these steps to add both covers and to select their
printing options:
1. Select the [Covers...] icon on the Job Ticket dialog box.
The Covers dialog box opens.
2. In the Covers dialog box, select either [Front and Back
Same] or [Front and Back Different] to add both a front
and a back cover to the job. Depending on your selection,
either the [Front Cover] and [Back Cover] fields or the
[Both Covers] field are displayed.
• Select [Front and Back Same] if the paper stock and
the sides printed will be the same for both the front
and back covers.
• Select [Front and Back Different] when the paper stock
or sides printed will be different for the front cover and
the back cover.