User's Manual

Job ticket options
Guide to Printing Using Xerox Production Print Services 9-21
d. Select [OK] to close the Image Shift dialog box.
Your specifications are displayed in the Image Shift
read-only field on the Exception Pages dialog box.
• Color: If the printer supports full color printing and you
want to specify color source and printing parameters
for the exception pages, do the following:
a. In the [Color] field, deselect the [Use Job Setting]
check box.
b. Select the [Color] icon to open the Color dialog
box.
c. Make any desired color parameter specifications.
Refer to “Specifying full-color parameters,” later in
this chapter, for an explanation of the color fields.
d. Select [OK] to close the Color dialog box.
• Anti-aliasing: To reduce the appearance of jagged
lines and edges in exception page images, select [On]
from the Anti-aliasing pop-up menu.
• Halftone: This feature provides the ability to specify
the halftone screen to be used when the job is
rendered. Select a halftone that most closely
represents the frequency you desire.
• Tone Reproduction Curves: This option allows you
to select a set of four intensity functions for cyan,
magenta, yellow, and black. The TRC pull-down menu
contains a list of transfer functions that were created at
the controller.
4. On the Exception Pages dialog box, select [Add]. The
exception page range is added to the [Defined Ranges]
list box.
5. Repeat steps 2 through 4 to program additional exception
pages if desired.
6. Select [OK] to save the exception pages and return to the
Job Ticket dialog box.
If you want to remove the changes you have made, select
[Cancel].
Viewing or changing an exception page
Follow these steps to view or to change an exception page or
range of exception pages:
1. On the Job Ticket dialog box, select the [Exception
Pages...] icon to open the Exception Pages dialog box.