User's Manual

Job ticket options
9-24 Guide to Printing Using Xerox Production Print Services
NOTE: The output resulting from these selections may be
affected by the content of the original image.
• Color Cast: A slider lets you select a color cast that will
be applied to all input colors. You have three color ranges
that you can adjust:
– Cyan – Red: -100 specifies the maximum cyan cast
that is supported by the system, and 100 specifies the
maximum red cast.
– Magenta – Green: -100 specifies the maximum
magenta cast that is supported by the system, and
100 specifies the maximum green cast.
– Yellow – Blue: -100 specifies the maximum yellow
cast that is supported by the system, and 100
specifies the maximum blue cast.
Specifying source color profiles
The Color dialog box also contains a [Source Color] button,
which opens the Source Color dialog box. On this dialog box,
you can accurately identify the correct source for color in the
document. Each field contains pop-up menus from which you
can select an Images profile and a Graphics/Text profile for
the following color spaces:
• RGB (red/green/blue)
• CMYK (cyan/magenta/yellow/black)
• Greyscale (monochrome)
The menus contain profiles that are provided by Xerox, plus
any additional profiles that have been added by the system
administrator at the controller.
These color source profiles are defined in the Printer
Capabilities file that was selected in the User Preferences
dialog box. If no Printer Capabilities file has been selected, a
default list of RGB and CMYK source ICC profiles is
displayed, and the other source profile lists are empty. Refer
to “Setting user preferences,” later in this chapter, for
information on selecting a Printer Capabilities file.
To select a source profile, follow these steps:
1. Select [Source Color] on the Color dialog box. The Source
Color Setup dialog box opens.
2. From the Images or Graphics and Text pop-up menu in
the desired Color Space field, select either [Use Job
Settings] or one of the source profiles that have been
loaded onto the printing system at the controller screen.