User's Manual

Job ticket options
Guide to Printing Using Xerox Production Print Services 9-25
3. Make additional profile selections as desired from the
menus in the other fields on the Source Color Setup
dialog box.
4. Select [OK] to save your changes and to return to the
Color dialog box.
If you want to return to the Color dialog box without saving
any changes, select [Cancel].
Specifying output color parameters
The [Output Color] button on the Color dialog box opens the
Output Color Setup dialog box, on which you can make
advanced level specifications that will modify colors in the
printed output. The following fields are available:
• Profile field: In this field, you can select one of two types
of profiles: Destination and Emulation.
• Select field: Lets you specify an International Color
Consortium (ICC) color profile for the front, back, or both
sides of the printed page. This profile is used by the
decomposer when it converts color data to the
appropriate color space for your printer.
• Rendering field: Lets you specify a rendering intent (a
predesigned method for adjusting colors during the
printing process) for graphics, image objects, and text
objects.
– Same Rendering for All check box: Causes the
rendering intent that you select from the Images menu
to be used for text and graphics as well. (The Graphics
and Text menus are disabled when you select this
check box.)
– Images, Text, and Graphic menus: These three
pop-up menus enable you to select a rendering effect
for Images, Text, and Graphics. For each of these
three items, the following selections are available:
• Printer Default
• Saturation: Adjusts the print colors to preserve
the amount of color saturation.
• Relative Colorimetric: Adjusts the print colors to
account for the viewing illuminant and for the level
of whiteness of the stock.
• Absolute Colorimetric: Adjusts the print colors to
account for the viewing illuminant only (not the
media whiteness). This selection provides exact
output color matches from one printer to another.