User's Manual

Job ticket options
Guide to Printing Using Xerox Production Print Services 9-27
If the job contains specifications for full color, the system
provides a conversion of full color documents to highlight
color by mapping each color to a shade or a tint of the
selected highlight color.
Specifying the mismatch action
From the Mismatch action pop-up menu, select the action
that the printer will take if the preferred highlight color is not
installed in the printer.
The options are:
• Printer Default
• Use Loaded Color: The document is printed using the
color that is installed in the printer. This selection is
appropriate when the actual highlight color is not
important.
• Hold Job: The document is held at the printer until the
specified color is installed.
• Cancel Job: The document is not printed and the print
job is cancelled if the specified color is not installed in the
printer.
Specifying the extraction color
When a highlight color printing system receives a color job, it
prints it in whatever color of ink is loaded in the printer, using
solid color and a variety of shades (color plus black) and tints
(color plus white).
Extraction color determines how the existing color of text,
shading, or graphics contained in a job will print on your
printer, and which color will print in the solid highlight ink
color. All colors other than the highlight (printer ink) color print
in a shade or tint of the color that is loaded in the printer.
To specify the color in the document that is printed in the solid
highlight color, select the desired color from the Extraction
color pop-up menu.
All other colors in the document, including composite colors
using the extraction color, are printed as shades or tints of the
printer color.
Selecting the rendering algorithm
The rendering algorithm allows you to select which qualities
of a three-dimensional color application are the most
important when printing in highlight color.
The choices are: