User's Manual

Job ticket options
Guide to Printing Using Xerox Production Print Services 9-29
3. Use the [Insert Position] box if you want to enter two or
more different sets of page inserts immediately following
the given page. For example, to specify three inserts of
blue paper followed by three inserts of green paper, the
blue paper is Insert Position 1 and the green paper is
Insert Position 2.
4. In the [Quantity] field, enter the number of blank pages
that will be inserted.
5. Specify a stock for the blank page inserts.
a. From the Paper Stock pop-up menu, select the
number of the stock that will be used for the blank
pages. The properties for the stock are displayed in
the [Paper Stock] field.
The number of available stocks may vary, depending
on the type of printer.
b. If you want to select a different stock ID or specify
different properties for the stock number, select the
[Stocks] icon to open the Paper Stock dialog box.
c. On the Paper Stock dialog box, select the same stock
number from the Paper Stock menu that you selected
on the Insert Pages dialog box.
d. Program the stock for the insert. Refer to “Specifying
stocks for the job” and “Specifying stock properties,”
earlier in this chapter, for further information.
e. Select [OK] to close the Paper Stock dialog box and
return to the Inserts dialog box. Your new stock
specifications are displayed in the [Paper Stock] field
on the Inserts dialog box.
6. Select [Add]. The order number, page number, quantity,
and stock number of the new blank page insert range
appears in the [Inserts] list box.
7. Select [OK] to save the blank page insert information and
return to the Job Ticket dialog box.
If you want to remove the changes that you made, select
[Cancel].
NOTE: DocuSP allows multiple page inserts, as well as the
ability to insert a page after page 0 (before page 1). However,
the DocuTech 135 does not allow these functions.
Changing an insert
Follow these steps to change a blank insert: