User's Manual

Job ticket options
9-34 Guide to Printing Using Xerox Production Print Services
1. In the [Document] field on the XDS window, enter or
browse to locate and display the name of the document
that will be reprinted. If the save directory is the default
save location that was set at the DocuSP controller, then
entering the source directory path is not necessary. If a
source directory that is different from the default save
directory was selected, enter the directory path to the
save location.
NOTE: The source directory and file names are case
sensitive and must be identical to the name of the file that
was submitted to be saved. Note that some network
gateway software changes the case to all lowercase or all
uppercase.
2. Select the [Reprint] check box. A message appears,
informing you that the job ticket settings that were saved
with the job will be used.
3. In the message window, select [OK] to proceed with
reprinting.
4. Select [Setup] to open the Setup window.
NOTE: When [Reprint] is selected in the Xerox Document
Submission window, all of the job ticket parameters are
set to either the system defaults or to [Printer Default].
5. Ensure that the number of copies that will be printed
matches the number of copies that were specified for the
reprint job, then select [OK].
6. Select [Print]. The job is sent to the printer for reprinting.
Reprinting with different job ticket parameters
When a job is saved, its job ticket is saved with it. The job
may be reprinted with different job ticket parameters as
necessary.
The saved job ticket cannot be changed. The job may be
submitted for reprinting with new parameters, but the new
parameters do not affect the saved ticket.
All of the job ticket parameters may be changed except the
PDL Type, which is set to [Printer default].