User's Manual

Using XDS
Guide to Printing Using Xerox Production Print Services 2-3
4. Set up the print job and job ticket.
The following setup procedures are accessed from the
Print Setup window:
• Specifying the imaging and finishing options.
• Including the notes that contain information about the
job.
• Defining the stocks to use during printing.
• Selecting any special features of the job, such as
covers, blank inserts, or exception pages.
Refer to “Setting up a print job,” later in this chapter.
5. Send the document file to the print queue.
NOTE: When you are performing the procedures, if you
press the <Return> or the <Enter> key, the XDS software
executes the default button in any Window. You can use
<Tab> to select the text boxes in every Window.
Macintosh printing process
The steps to print a document on a selected printer are listed
below. For the details on performing the procedure specified
in each step, refer to the procedure explanation later in this
chapter.
1. Set up a printer and select the printer icon on the desktop.
2. Launch the Xerox Document Submission software.
NOTE: More information about how to use the XDS
software is located in the next section of this chapter.
3. On the Document Submission window, select a printer
type from the Printer Type pop-up menu.
4. From the Printer Queue menu, select [Use Default
Printer]. If you want to create Xerox job tickets without
printing, select [None].
5. Select a file for printing.
6. Select [Print...] to set up the print job.
7. On the job ticket dialog box that opens, specify the
available parameters. Depending on your printer, the
following parameter fields may be displayed:
• [Copies]
• Page range ([To] and [From])
• [Job Type]