User's Manual

Using the XDS Plus software
Guide to Printing Using Xerox Production Print Services 3-7
• [Show All Queues]: Displays in the [Queues] section all
queues that have been created at the controller, for all
printers that have been specified in the printer discovery
file and are currently available.
• [Set Print Path]: Confirms your queue selection and
closes the Change Printer window. This button is grayed
out unless a queue is selected.
• [Refresh]: Updates and redisplays the Printers and
Queues lists.
Viewing printer and queue properties
You can view information about printers and queues in the
following ways:
• Select the printer or queue name on the Change Printer
window.
– If you select a printer name, the [Queues] section of
the Change Printer window displays the queues that
are enabled for that printer only.
– If you select a queue name, the [Printers] section of
the Change Printer window displays only the printer
that contains that queue.
You can select multiple printer or queue names by holding
down the <Control> or <Shift> key while selecting the
items. If you select more than one printer or queue, the
other window displays the queues or printers for all the
items that you selected.
• Open the Properties window for the desired queue or
printer by following these steps:
1. Select [Change Printer] on the XDS Plus window. The
Change Printer window opens.
2. In the [Printers] or [Queues] section on the Change
Printer window, double-select the name of the printer
or queue. Or, right-select on a printer or queue and
select [Properties]. The read-only Properties window
opens for the selected queue or printer.
3. When you are finished viewing the information, select
[Close] to close the Properties window.
NOTE: You can also access individual printer and queue
information from the Printers and Queues lists on the Print
Monitor tab window, which you display by selecting
[Administration] on the XDS Plus window.