User's Manual

Using the XDS Plus software
3-10
NOTE: You are not able to add printers or queues to these
lists at the Change Printer window.
The title of each section is preceded by a number that
indicates how many items are on the list that is displayed
there. However, if you select an item in one of the tables, the
number changes to reflect the number of that item. For
example, if you select a queue from the Queues list, the
number changes to the number of jobs in that queue.
Resizing the sections The [Printers] and [Queues] sections are separated by a
splitter bar. You can drag this bar up and down to increase or
decrease the height of the sections relative to each other.
You can also expand either section to fill the work space of
the Change Printer window by selecting the small, triangular
buttons near the left edge of the splitter bar.
Buttons The Change Printer window contains the following buttons:
• [Show All Printers]: Displays in the Printers section all
the printers that have been specified in the printer
discovery file (printer.disc) and are currently available.
• [Show All Queues]: Displays in the [Queues] section all
queues that have been created at the controller, for all
printers that have been specified in the printer discovery
file and are currently available.
• [Set Print Path]: Confirms your queue selection and
closes the Change Printer window. This button is grayed
out unless a queue is selected.
• [Refresh]: Updates and redisplays the Printers and
Queues lists.
Viewing printer and queue properties
You can view information about printers and queues in the
following ways:
• Select the printer or queue name on the Change Printer
window.
– If you select a printer name, the [Queues] section of
the Change Printer window displays the queues that
are enabled for that printer only.
– If you select a queue name, the [Printers] section of
the Change Printer window displays only the printer
that contains that queue.