User's Manual

Using the XDS Plus software
Guide to Printing Using Xerox Production Print Services 3-11
You can select multiple printer or queue names by holding
down the <Control> or <Shift> key while selecting the
items. If you select more than one printer or queue, the
other window displays the queues or printers for all the
items that you selected.
• Open the Properties window for the desired queue or
printer by following these steps:
1. Select [Change Printer] on the XDS Plus window. The
Change Printer window opens.
2. In the [Printers] or [Queues] section on the Change
Printer window, double-select the name of the printer
or queue. Or, right-select on a printer or queue and
select [Properties]. The read-only Properties window
opens for the selected queue or printer.
3. When you are finished viewing the information, select
[Close] to close the Properties window.
NOTE: You can also access individual printer and queue
information from the Printers and Queues lists on the Print
Monitor tab window, which you display by selecting
[Administration] on the XDS Plus window.
Selecting a printer and queue
Follow these steps to select a printer and print queue for your
job:
1. On the XDS Plus window, select [Change Printer] to open
the Change Printer window.
2. If the queue that you want is not displayed in the [Queues]
section, select [Show All Queues].
3. In the [Queues] section, select the name of the queue to
which you want to send the job.
The Printers section displays the name of the printer that
is associated with the queue that you selected.
4. Select [Set Print Path] to confirm your selection and close
the Change Printer window.
NOTE: This can also be performed using the Printer menu
and select [Change Queue].