User's Manual

Printing a job using the DocuSP web interface
4-2 Guide to Printing Using Xerox Production Print Services
6. Select the type of page description language (PDL) that
will be used for the job. If you select an [ASCII] option,
select the font and its size and the font orientation. Refer
to “Selecting the PDL type.” Select the [Printer Default]
check box if you want to specify the setting that is entered
at the printer controller.
7. Set up the remaining job ticket parameters in this section
of the Job Submission window as required. Refer to
“Setting up a print job.”
8. Specify the job parameters in the [Image Adjustment]
section of the Job Submission window as needed. Refer
to “Setting up advanced features.”
9. If desired, record job notes by entering them in the fields
in the [Job Information] section. Refer to “Entering job
information.”
10.Send the document file to the print queue.
NOTE: When you are performing the setup procedures, you
can use <Tab> to move the cursor to the next button or text
box in every window. Holding down <Shift> while pressing
<Tab> causes the cursor to move backward through the
items on the window.
While the job is printing, you can check the job status by
selecting the [Administration] button. Refer to “Checking job,
printer, and queue status and messages,” later in this
chapter.
Setting up a print job
The web interface Job Submission window enables you to
set up your print job by creating or selecting job tickets. This
window is divided into two sections:
• Printing section: This stationary section at the top of the
Job Submission window contains queue and file
selections and the [Print] button.
• Job parameters section: This section contains fields in
which you can specify job parameters such as copies,
PDL type, and image shift. It also contains a Job
Information section in which you can record information
such as the job name, sender and recipient names, and
the account number.
NOTE: Do not enter job names, sender names, or queue
names which total over 140 characters.