User's Manual

Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services 4-3
NOTE: A queue name, sender name, and job name must
contain valid URL characters when using the DocuSP web
interface for job submission, job and queue status, and
listings.
Valid URL characters are:
“a-z” “A-Z” “0-9” “-” “_” “.” “!” “~” “*” “‘” “(“ “)”
The following sections discuss the parameters and print
instructions that you can specify from the Job Submission
window.
Job tickets
A job ticket is a set of specified printing options that the
system will use for a job. On the Job Submission window, you
can specify a wide range of parameters for the job that you
are printing. The information in the job ticket accompanies
the job to the printer and gives the printer instructions on how
to print the job.
When you submit a job, you can specify its parameters by
one of the following methods:
• Specify all desired parameters that are available on the
Job Submission window. These settings apply to the
current job only and are not saved as a job ticket file.
• Select the default job ticket that is on your workstation.
You can modify and save this job ticket from the Job
Submission window if desired.
• Select the queue default job ticket that was specified on
your printer controller.
Specifying job ticket parameters for the current job
You can create a new ticket for a job at the time you are
sending the job to print, by selecting or entering options in the
fields on the Job Submission window. You cannot save or
restore this job ticket unless you save it as your default job
ticket, replacing the existing one. Refer to “Modifying the
default job ticket,” later in this chapter, for the procedure.
Follow these steps to create a job ticket for the current job:
1. Select a printer queue.