User's Manual

Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services 4-7
Selecting the Printer Default option
A [Printer Default] check box appears in many of the job
ticket fields on the Job Submission window. This option can
be used to print the job using the queue default, the queue
override, or the option that was set using the PostScript
setpagedevice command.
When [Printer Default] is selected, the job is printed using the
option that was set in one of the categories that are shown in
priority order in the following figure.
The figure above illustrates that parameters that are specified
as queue overrides at your printing system controller are
used as defaults first. If no queue overrides have been
specified, parameters on any exception pages are used, and
so on.
NOTE: If the [Printer Default] check box is selected, you must
deselect it if you want to select any of the other options in the
same field.
For information regarding selecting a print queue, refer to
“Selecting a Print Queue” found later in this chapter.
Specifying the number of copies
To select the number of copies of your document that will be
printed, follow these steps:
1. On the Job Submission window, scroll until the [Quantity]
field is visible.