User's Manual

Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services 4-9
2. If the desired stock does not appear on the menu, select
the [Stocks...] button next to the Main Paper Stock menu
to display a list of all stocks that have been enabled for
your printer.
You can also define a stock by selecting [New] from the
Main Paper Stock window.
3. Add the stock that you want to the Main Paper Stock pull-
down menu by selecting the [Favorites] check box next to
the name of the stock on the stock window.
If your desired type of stock does not appear on the
stocks window, you may add it as a user stock.
Refer to “Setting up stocks,” in the next section, for the
procedure for adding a stock.
Setting up stocks
The stock window enables you to select a stock to use for the
job, or to add a new stock as the user stock. You are able
select one stock for a job.
Displaying the stock window
To display the stock window from which you select stocks for
the job, select [Stocks...] on the Job Submission window.
The stock window is displayed in the Job Submission window
below the stationary printing section.
Stock window components
This section describes the parts of the stock window.
Sections
The stock window contains the following major sections in
which stocks are described:
• Stock used in Job: This section displays the name and
properties of the printer or user stock that has been
selected for the current job.
• Stocks: This section lists the printer stocks that are
associated with the printer. Properties for these printer
stocks are entered at the printer controller user interface
window.