User's Manual

Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services 4-11
Additional buttons
The following buttons are displayed at the bottom of the
stocks window:
• User Stock: Displays the Custom window, which
contains fields that enable you to define properties for a
user stock.
• Apply: Implements the changes that you have made on
the stock window without closing the window.
• OK: Implements your changes and closes the stock
window.
• Cancel: Closes the stock window without making any
changes that you may have entered.
Selecting a stock for the job
You are able to select one stock for the current job. The web
interface does not support special pages that may require
additional stocks. Use the following procedure if the stock
that you want to use for your job does not appear on the Main
Paper Stock pull-down menu on the Job Setup window.
1. On the Job Submission window, select [Stocks...]. The
stock window is displayed.
2. On the stock window, select the radio button at the left of
the desired stock name. You may select a printer stock
from the [Stocks] section, or the current user stock.
If you do not see the stock that you want on the stock
window, you may add the stock as the user stock. Refer to
“Creating a new stock,” later in this chapter, for the
procedure for creating a new custom stock.
3. If you want this stock to remain on the Main Paper Stock
pull-down menu after the job is completed and new job
parameters are entered, select the [Favorites] check box
next to the stock name on the stock window.
4. Select [OK] to confirm your selection and close the stock
window. The stock name that you selected appears in the
Main Paper Stock field on the Job Submission window.
Creating a new stock
You can create a new custom stock that becomes the user
stock and specify this stock for subsequent jobs. When you
add a new user stock, it replaces the existing user stock; you
are not able to have more than one user stock available at a
time.