User's Manual

Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services 4-17
2. Set the amount of image shift in the x (horizontal) and y
(vertical) directions for Side 1 and Side 2 (if required). You
can enter the amount in the text boxes or select the
incremental arrow buttons until the desired amount of shift
is displayed.
NOTE: The amount of image shift that you specify may be
stated in inches or millimeters. The title of the Image Shift
pull-down menu displays in parentheses the unit that was
selected from the Preferences window. Refer to “Setting user
preferences,” later in this chapter, for the procedure for
setting the desired unit of measure for your system.
Specifying Rotation
The Rotation field allows you to select a rotation. The choices
available depend upon the attached printer, but may include
0, 90, 180, and 270.
Selecting OPI
Open Prepress Interface (OPI) is an extension of the
PostScript page-description language that enables you to
design pages with low-resolution images, then replace those
images with high-resolution images when printing. By using
low-resolution images in page layout applications (e.g., in
Adobe PageMaker or QuarkXPress), you can reduce the size
of the page layout files and reduce processing time when
working in the file. Select either [Substitute High Resolution
Images] or [Printer Default] from this option.
Selecting OPI Prescan
This job-level programming feature allows you to specify one
of three options, described below. The feature is only
applicable to jobs sent to non-streaming queues. The feature
is supported only on PostScript jobs. The options available
are:
• None: The controller shall neither locate high-resolution
image files nor retrieve them to the input spool disk prior
to decomposition
• Scan: The controller shall attempt to locate high-
resolution image files and record known paths prior to
decomposition.
• Scan and Gather: The controller scans and also
attempts to locate high-resolution files and retrieve them
to the input spool disk prior to decomposition.