User's Manual

Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services 4-21
Specifying source color profiles
The [Source Color] section of the Expert Color Settings
window enables you to accurately identify the correct source
for color in the document by selecting an Images Profile and
a Graphics and Text Profile for the color spaces in the
following fields:
• [RGB Color Space] (red/green/blue)
• [CMYK Color Space] (cyan/magenta/yellow/black)
• [Grayscale Color Space] (monochrome)
From the Images Profile and the Text and Graphics Profile
pull-down menus in the desired color space field, select one
of the source profiles that have been loaded onto the printing
system at the controller window. If you want to use the default
profile that was set at the printer controller, select the [Printer
Default] check box.
Specifying output color parameters
The [Output Color] section of the Expert Color Settings
window contains fields in which you can make advanced
level specifications that will modify colors in the printed
output. In each of the following fields you can select an option
from the pull-down menu, or select the [Printer Default] check
box if you want to use the profiles that were set at the printer
controller.
• Destination Profile: Lets you specify an International
Color Consortium [ICC] color profile for the front, back, or
both sides of the printed page. This profile is used by the
decomposer when it converts color data to the
appropriate color space for your printer.
The pull-down menu contain a list of the destination
profiles that have been created at the controller. You may
select a profile that applies to both the front of the page
and the back.
• Rendering: Rendering allows the user to select desired
rendering effect for all PDL objects. A rendering intent
selects a predefined method for adjusting colors during
rendering (during the printing process) so as to achieve
some particular user requirement. This option allows you
to specify a rendering intent (a predesigned method for
adjusting colors during the printing process) for graphics,
image objects, and text objects.