User's Manual

Using Command Line Client
6-7
Syntax –p <printer>
Argument <printer>
Specifies the directory path and name of the printer to which
you want to send jobs. This path and name must be entered
exactly the way it appears on the printer list that is generated
by the –Listp command. Refer to “Listing the printers,” earlier
in this chapter.
Print queue status: -ListQ <options>
Lists available queues and displays the status of each queue.
Syntax -Listq <options>
Argument -l or -L
Displays the queue name, identification number, status,
priority, printer name, printer type, network address, and any
comments for the specified queue.
Argument -v or -V
Displays queue name, identification number, status, priority,
resolution, start date and time, creation date and time,
number of queued jobs, queue attributes, printer name,
printer type, printer network address and any comments.
Argument -server <DocuSP controller name>
Requests information for the specified DocuSP controller. If
the “-server” option is not used, a query will be sent to the
DocuSP controllers listed in the XDS Plus printer discovery
file (printer.disc).
Argument -p or -P
Requests information for the specified printer queue only.
Setting the RegFileLoc
For information on creating and setting up the printer
discovery file, refer to the Installation Guide. To set the
Printer Registration File location, use this synatax.
Syntax RegFileLoc -<location>