User's Manual

The Xerox Custom PostScript printer drivers
Guide to Printing Using Xerox Production Print Services 8-3
5. Select [Options] or [Properties]. The Job Ticket setup
window is displayed.
NOTE: For Windows NT and Windows 2000, selecting
[Options] or [Properties] provides the printer properties.
To open the properties for other operating systems, select
the [Xerox Settings] tab to open the Job Ticket Setup
window.
NOTE: If you are submitting a job with a defined page
range and the application supports defining a page range
to print, set the page range in the application rather than
in the Xerox Job Ticket. Setting the page range in the
application creates a smaller PDL file.
For further information regarding job ticket options and
selections, refer to the Job Ticket options section later in this
document.
Starting printing
After you have selected all of the options and features of the
print job, you must exit the Job Ticket setup window and use
your application print windows to start the print process.
1. Select [OK] to exit the Setup window.
2. Select [OK] to exit the [Print Setup] window.
3. Select [OK] or [Print] in the [Print Options] window to start
the printing process.