User's Manual

Job ticket options
9-2 Guide to Printing Using Xerox Production Print Services
NOTE: Printer Limitations is not available on Macintosh
systems.
The Printer default option
A Printer default selection appears in many of the job ticket
fields. This option can be used to print the job using the
queue default, the queue override, or the option that was set
using the PostScript setpagedevice command.
When [Printer default] is selected, the job is printed using the
option that was set in one of the categories that are shown in
priority order in the following figure.
The figure above illustrates that parameters specified as
queue overrides at your printing system controller are used
as defaults first. If no queue overrides have been specified,
parameters on any exception pages are used, and so on.
Setting job ticket options for XDS
A job ticket specifies a set of printing options that the system
will use for a job. Every time you print a job, you must specify
or create a job ticket for it. The information in this job ticket
accompanies the job to the printer, and gives the printer
instructions on how to print it.
You select or enter parameters for the job ticket in the fields
on the Setup window. You can apply this set of specifications
to your current print job only, or you can save them as a job
ticket file and retrieve the file for use with other jobs.