User's Manual

Job ticket options
9-8 Guide to Printing Using Xerox Production Print Services
Specifying collation
The Collation option determines the sequence in which the
finished prints are stacked in the output tray.
• Printer Default
• Collated: Prints the pages of a document in numerical
sequence.
• Uncollated: Prints the requested number of copies of the
first specified page of a document before printing the next
page.
Specifying the image rotation
From the Rotation pop-up menu, select [90], [180], or [270]
degrees if you want to rotate the page image on the printed
sheet.
Specifying an image shift
The options in the [Image Shift] field allow you to offset the
printed image from the vertical or horizontal edges of the
sheet. Shifting the image is particularly useful for finished
jobs that require drilled stock and for preprinted forms.
To shift the printed image for your job, follow these steps:
1. Select the image shift options button to display the Image
Shift dialog box.
2. On the Image Shift dialog box, use the arrow buttons to
enter the amount of shift in the desired direction for side 1
and side 2 as required.
NOTE: When the Image Shift option is set at 0 (zero), the
image is not shifted.
• [Horizontal image shift]: Moves the image
horizontally on the portrait or landscape page. The
right arrow shifts the image towards the right edge of
the page and the left arrow shifts the image towards
the left edge of the page.
• Vertical image shift: Moves the image vertically on
the portrait or landscape page. The up arrow shifts the
image towards the top of the page and the down arrow
shifts the image towards the bottom of the page.
• Independent side 2 image shift: Some printers
support independent side two image shifting. If Sides
Imaged is set to [2-sided] or [Head-To-Toe], the image
shift values for X2 and Y2 may be available.