User's Manual

Job ticket options
9-10 Guide to Printing Using Xerox Production Print Services
4. Select [OK] to close the Image Shift dialog box. Your shift
specifications are displayed in the read-only [Image Shift]
field on the Job Setup dialog box.
NOTE: Any image shift that is set in the Image Shift dialog
box may interfere with any offset for binding that is set by the
application in the document file.
Selecting an Output Location
In the Job Setup dialog box, you can select an output
location. Ensure that the stock and finishing type that are
selected are compatible with the output that you select. The
available output selections are:
• Printer Default
• System Specified
• Top Tray
• Stacker
Specifying Halftone
This feature provides the ability to specify the halftone screen
to be used when the job is rendered. Select a halftone that
most closely represents the frequency you desire.
Tone Reproduction Curves (TRC)
This option allows you to select a set of four intensity
functions for cyan, magenta, yellow and black. The TRC pull-
down menu contains a list of transfer functions that were
created at the controller.
Specifying anti-aliasing
The [Anti-aliasing] field allows you to alleviate any aliasing
problem that may occur in an image. Aliasing means
inaccurate rendition of line width and position, and a jagged
appearance on the edges of images. If anti-aliasing is
enabled, the system uses intermediate levels of imaging
intensity to improve the accuracy of line width and reduce the
jagged effect.
To enable anti-aliasing, select [On] from the Anti-aliasing pop-
up menu.