Installation Guide

Installation and configuration for Macintosh
3-8 Installation Guide
e. Open the XDS folder.
4. Double-click the [XDS] 3.7x icon to open it.
5. Select [OK]. The Document Submission window opens.
6. Use the Desktop Printer Utility to configure the printers for
the application prior to submitting a document. Refer to
“Configuring the printers,” earlier in this chapter, and your
Macintosh documentation for the procedures.
NOTE: In order to configure the printers and to print
documents using XDS, you need to install the AdobePS
8.7.3 printer driver. Refer to “Installing and configuring the
AdobePS driver,” earlier in this chapter.
Installing additional products
After you have installed the XDS software, you may select
another product configuration if you have additional
supported Xerox printers to which you will send jobs for
printing.
1. Open the XDS icon.
2. From the XDS Splash screen, select [OK].
3. From the Options pull-down menu on your workstation
menu bar, select [Product Configuration].
4. Select the check boxes for the additional products that will
be used, then select [OK].
Ejecting the cd
After you have completed installation, drag the CD icon to the
trash can icon on the desktop. Release the icon. The cd is
ejected.