Installation Guide

Installation and configuration for Windows
4-6 Installation Guide
Removing NT 4.0 and other drivers
To remove the current NT 4.0 Custom Xerox PS driver or any
other driver that could not be uninstalled using the procedure
that is described in the previous section, perform the
following:
1. From the Windows Start pop-up menu, select [Settings],
then [Control Panel].
2. On the Control Panel window, open the [Printers] icon.
3. On the Printers window, select and delete the printer icon.
Installing XPPS on Windows 95, 98, and Millennium systems
CAUTION: The printer preferences may be lost when
installing the XDS 3.7x software.
The Xerox Document Submission software (XDS) is a
standalone application that is used to enter job ticket
information for an existing PDL file. The Xerox printer drivers
are used by Windows applications to program Xerox job
ticket information and create a PDL output for either
PostScript or PCL5e. Printer drivers have not been designed
to support terminal servers.
This section details the instructions for the Xerox Document
Submission software and the various drivers available for
printing to the Xerox printers from a Windows 95, 98, or
Millennium (ME) system.
NOTE: Each Xerox printer provides different printer language
support. Some provide PS only, some PCL only, some both.
Choose the driver that will provide the most support for the
applications and Xerox printer you are using.
Installing Xerox Document Submission (XDS) and Xerox printer
drivers
This section explains how to install the Xerox Document
Submission (XDS) application and the Xerox custom
PostScript and PCL printer drivers for Windows 95, 98, and
ME platforms.
Perform the following steps: