Installation Guide

Installation and configuration for Windows
Installation Guide 4-7
1. Close all applications, remove any drivers that will be
replaced, and restart the workstation to avoid initialization
and General Protection Fault error messages.
2. Insert the Xerox Production Print Services (XPPS) version
3.7x software CD-ROM into the CD-ROM drive of your
PC.
3. Select a language in which the XPPS screens will display.
4. On the About XPPS window, select [Main Menu].
5. Select [XPPS].
NOTE: The installation program will automatically detect
which version of Windows is available.
6. Select [Install Xerox Printer Drivers and XDS].
7. Select the appropriate language and then select [Ok].
8. At the Welcome screen, select [Next].
9. Select a Setup Type (Typical, Compact, or Custom). A
Typical setup is recommended. Select [Next].
10.By default, the [Xerox Document Submission (XDS) for
Windows] option is selected. At least one selection in the
right hand window must be made otherwise XDS will not
work properly. In the right hand window, select only the
components you will be using from your workstation.
• [DocuPrint] for DocuPrint NPS/IPS printers
• [DocuSP] for DocuTech 61xx, DocuPrint EPS Printers,
DocuTech 65/75/90, and DocuPrint 65/75/90
• [DT Server] for DocuTech 135 or 90 with Network
Server or NS Plus Server Series
• [DocuColor] for DocuColor 20XX, 6060, and iGen3
In the left-hand window, select the additional driver
components. For each selection, the right hand window
will display the supported printers for which drivers are
available. Select all the printers that are being installed.
11.Select [Next].
12.Read and accept the Adobe End User License Agreement
by selecting [Yes].
13.Assign a port to each selected printer. Select [Next]. If you
are installing several printers, you may have more than
one port assignment screen.
14.Confirm the settings and select [Next].
15.Select to restart the workstation and select [Finish].