Installation Guide

Installation and configuration for Windows
4-8 Installation Guide
16.If you would like to view the Readme file, select [Finish];
otherwise deselect “Yes, I want to view the README file”
and select [Finish].
CAUTION: Do not rename the printers when installing XDS
and the Xerox print drivers. If a printer is renamed, the job
ticket settings will be lost when printing with the Xerox
customized PostScript driver.
If you wish to rename a printer, it must be renamed
immediately after the printer is installed (before printing or
viewing printer properties).
Installing Adobe PS printer driver with Xerox PPD files
This section describes the procedures for installing a Xerox
PPD file for use with the Adobe PostScript driver.
NOTE: If you are prompted for the PSCRIPT.DLL file during
the installation of the Xerox PostScript drivers, check the
hard drive for the file. If not found, you may need the
Windows CD to locate the file.
NOTE: You will need to either set up the printer port prior to
installing the PPD files using Add Printer in [Settings:
Printers] or, after the installation is complete, configure the
port.
NOTE: Using the Adobe PS driver with a Xerox PPD file does
not provide access to the full feature set of the printer and
does not access the Xerox Job Ticket.
1. Insert the Xerox Production Print Services (XPPS) version
3.7x software CD ROM in the CD ROM drive on your PC.
The installation program starts automatically. Depending
on your system, this may take a few seconds.
2. On the Choose Language screen, select a language in
which the XPPS screens will be displayed.
3. On the About XPPS screen, select [Main Menu].
4. From the Main Menu, select [Install XPPS].
NOTE: The installation program automatically detects
which version of Windows is available.
5. From the installation menu, select [Install Adobe PS
Printer Drivers].
6. Read the instructions on the screen and note the directory
location of the Xerox PPD file, then select [Continue with
Install].