Installation Guide

Installation and configuration for Windows
4-12 Installation Guide
10.If the destination folder c/:program files/XPPS/ does not
exist on your workstation, one will be created for you.
Select [Yes] to confirm the directory creation.
11.On the Select Components window, [Xerox Document
Submission (XDS) for Windows] is already selected by
default.
a. In the window on the right, select only the components
that you will use on your workstation:
• [DocuPrint] for DocuPrint NPS/IPS printers
• [DocuSP] for DocuTech 61xx, DocuPrint EPS
printers, DocuTech 65/75/90, and DocuPrint 65/75/
90
• [DT Server] for DocuTech 135 or 90 with Network
Server or NS Plus Server Series
• [DocuColor] for the DocuColor 20xx, 6060, and
iGen3 printers
NOTE: In order for XDS to function properly, you must
make at least one selection in the window on the right.
b. Select [Next].
12.On the next window, verify the settings that you have
specified, then select [Next]. The system copies the XDS
files to your workstation disk.
13.On the Setup Complete window, select [Finish] if you want
to view the “Readme File” at this time. Otherwise,
deselect the check box beside [Yes, I want to view the
README file], then select [Finish].
After you have successfully completed the installation, the
program group Xerox Applications is added to your
workstation Start menu. The XPPS installation menu is
displayed again.
14.Select another option to continue with installation of
additional printer drivers, or select [Exit] to end the
installation program.
Refer to the “Guide to Printing Using Xerox Production Print
Services” guide for the procedure for setting up printer
connections and accessing the XDS software.
Installing Xerox custom PostScript and PCL drivers for Windows