Installation Guide

Installation and configuration for Windows
4-14 Installation Guide
NOTE: The “Enu” folder name stands for United States
English. If you selected a different language from the
Choose Language screen, a different name appears in
this position, representing the language that you chose.
13.Open the .inf file.
14.On the Install from Disk window, select [Ok].
15.On the next window, make sure that the printer model
(along with the PDL) that you selected previously is
highlighted, then select [Next].
16.If the system asks you to do so, select [Replace Existing
Driver] and select [Next].
17.Change the printer name if desired. The printer name
should easily identify the printer. If another printer that is
already installed has this name, enter a different name.
18.If desired, select [Yes] to make the selected printer the
default for all Windows-based applications, then select
[Next].
19.Select either [Shared] or [Not Shared], then select [Next].
20.If you selected [Shared], do the following:
a. Enter a name that will be used for the shared printer.
b. Select the operating systems of all of the computers
that will print to the shared printer.
NOTE: Only 9x files are provided as shared. The
shared files are located on the cd at $/XPPS/
Win95_98/shared.
c. Select [Next].
d. Determine where the shared driver resides, then
select the desired driver that will be shared.
21.Select the option to print a test page to ensure that the
installation completed correctly, then select [Next]. The
printer drivers are installed.
NOTE: If prompted for the PSCRIPT.DLL during the
installation, you may need to use the Microsoft Windows
CD to locate the PSCRIPT.DLL. Or, you may also try to
find the PSCRIPT.DLL on the hard drive.
22.Validate that the test page printed correctly, then select
[Yes]. If the test page did not print, you may select [No] to
obtain troubleshooting tips that will help you to resolve the
problem.