Installation Guide

Installation and configuration for Windows
Installation Guide 4-15
23.Select [Back] to install additional printer drivers, or select
[Exit] to end the installation program.
Enabling a custom paper size with the Xerox printer driver
If a custom paper size is required, you enable the new paper
size by saving it as a custom form. Perform the following
steps to ensure proper performance:
1. From the Windows Start popup menu on your workstation,
select [Settings], then select [Control Panel].
2. On the Control Panel, open the [Printers] icon.
3. From the File menu on the Printers window, select [Server
Properties].
4. On the Print Server Properties window, select the [Forms]
tab.
5. Select the [Create a New Form] check box.
6. Enter a name for the custom sized form in the [Form
Description] box.
7. Select [Save Form], then select [OK].
Printing on a custom sized stock
To print from an application for which you will use a custom
sized stock, follow this procedure to set up for printing:
1. If the document that you want to print is open:
a. Select [Print] from the File pull-down menu within the
application in which the document was created.
b. On the Print Document window, select [Setup].
If the application is open, but the document is not, select
[Print Setup] from the File menu within the application.
2. On the Print Setup window, select the desired printer from
the printers pull-down menu.
3. Select [Properties].
4. On the Properties window, select the [Advanced] tab.
5. Ensure that [Paper Size] is highlighted in the top section
of the window.
6. In the lower section of the window, select [PostScript
Custom Page Size].
7. In the top section of the window, select the [Xerox
Document Settings] option.