Installation Guide

Installation and configuration for Windows
4-16 Installation Guide
8. On the PostScript Custom Page Size Definition window,
set the properties of the custom paper stock as desired.
The available settings include:
• Width and Height
• Unit (of measurement)
• Paper Feed Direction (short-edge or long-edge)
• Type (cut-sheet or roll feed)
• Offsets relative to feed direction (parallel or
perpendicular)
9. Select [OK] to close the custom size window. If you want
to change any of the settings you made, select [Edit
Custom Page Size] to reopen the window.
10.Select [OK] on each window until you have returned to the
Print dialog box.
11.In the Print dialog box, select [Print] to start printing.
Installing Xerox custom PostScript and PCL drivers for Windows
2000
The Xerox custom PostScript printer drivers provide full
support of the Xerox Job Ticket and all of the features of the
supported Xerox printers.
This section describes the procedure for installing the Xerox
custom developed printer drivers for Windows 2000.
1. Insert the Xerox Production Print Services (XPPS) version
3.7x software CD ROM in to the CD ROM drive on your
PC. The installation program starts automatically.
Depending on your system, this may take a few seconds.
2. On the Choose Language screen, select a language in
which the XPPS screens and installation script will be
displayed.
3. On the About XPPS screen, select [Main Menu].
4. From the Main Menu, select [Install XPPS].
NOTE: The installation program automatically detects
which version of Windows is available
5. Select [Install Xerox Printer Drivers].