Installation Guide

Installation and configuration for Windows
Installation Guide 4-19
Installing the Adobe PS Printer Driver with Xerox PPD files for
Windows 2000
This section describes the procedures for installing a Xerox
PPD file for use with the Adobe PostScript driver on Windows
2000 systems.
Using the Adobe PS driver with a Xerox PPD file does not
provide access to the full feature set of the printer and does
not access the Xerox Job Ticket.
NOTE: You will need to either set up the printer port prior to
installing the PPD files using Add Printer in the [Settings:
Printers] menu, or, after the installation is complete, then
configure the port.
1. Insert the Xerox Production Print Services (XPPS) version
3.7x software CD ROM in the CD ROM drive on your PC.
The installation program starts automatically. Depending
on your system, this may take a few seconds.
2. On the Choose Language screen, select a language in
which the XPPS screens will be displayed.
3. On the About XPPS screen, select [Main Menu].
4. From the Main Menu, select [Install XPPS].
NOTE: The installation program automatically detects
which version of Windows is available.
5. From the installation menu, select [Install Adobe PS
Printer Drivers].
6. The next screen gives the location of the printer
information that is required for installation of the drivers.
Read the instructions on the screen and note the directory
location of the PPD files on the XPPS CD, then select
[Continue with Install].
7. On the Welcome window, select [Next].
8. Read the Adobe End User License Agreement, then
select [ACCEPT] to accept the agreement.
9. On the next window, select the type of printer connection:
[Local Printer], [Network Printer], or [WebReady Printer],
then select [Next].
10.If the printer is a network printer, enter the network path or
queue name, or browse to locate the printer on the
network.