Installation Guide

Installation and configuration for Windows
4-22 Installation Guide
PostScript Level 2 with DocuSP 1.3x and lower
In order to use the Xerox PostScript driver or the native
Adobe PostScript driver with Xerox PPDs, version 2.3 or
higher, with a DocuTech 61xx or DocuTech 65/DocuPrint 65
with DocuSP version 1.3x or lower, perform one of the
following procedures as appropriate.
Note which printers available on the client workstation are
PostScript Level 3 (DocuSP 1.4 or higher) and which are
PostScript Level 2 (DocuSP 1.3x or lower).
In Windows 95/98: For printers that support PostScript Level
2 follow this procedure.
1. From the Windows Start menu, select [Settings], then
[Printers].
2. On the Printers window, select the right mouse button on
the name of the PostScript Level 2 printer.
3. Select [Properties] from the pop-up menu that appears.
4. On the Properties window, select the [PostScript] tab.
5. On the PostScript tab, select [Advanced].
6. Change the PostScript language level from 3 to 2.
7. Select [OK].