Installation Guide

Installation Guide 5-1
5 Installation and
configuration for XDS
Plus
The Xerox Document Submission Plus (XDS Plus) software
is a standalone application that is used to enter job ticket
information for an existing PDL file and submit the job to an
available printer running DocuSP version 3.1 or higher
software.
This chapter contains the information that you need to install
the Xerox Document Submission Plus (XDS Plus)
application. This software enables users of Xerox supported
networks to take advantage of the many printing options that
are offered by the supported Xerox printing systems.
You do not need to install printer drivers in order to submit
jobs using XDS Plus. When the XDS Plus software is
installed on your workstation, it automatically establishes
communication with all printers to which your workstation is
connected.
NOTE: For information on how to configure the IPP and
HTTP gateways at the DocuSP controller, refer to the
Common Controller System Guide. This information is also
available on the Help screens of the DocuSP.
NOTE: Throughout this section, shortcuts are often
described. Although shortcuts are helpful, they will only work
if the default shortcut location was used at install.
Workstation requirements
Your workstation must meet the following hardware and
software requirements to run XDS Plus: