Installation Guide

Installation and configuration for XDS Plus
5-6 Installation Guide
You may set up the printer discovery file from within XDS
Plus after installation. Refer to “Setting up the printer
discovery (printer.disc) file,” in this document for the
procedure.
The 98/ME Pre-Installation Summary window is
displayed.
NOTE: The printer registration file is shared by both the XDS
application and the XDS Command Line.
16.On the Install Complete window, select the [View
ReadMe] check box if you want to open the ReadMe file,
then select [Done]. You are returned to the XPPS
installation menu.
17.Select another item to install, or select [Exit] to exit the
installation program, and reboot your system
18.Specify the printers that you will use with XDS Plus, using
the XDS Printer Registration tool to edit the printer
discovery file. Refer to “Setting up the printer discovery
(printer.disc) file,” later in this chapter, for the procedure.
19.The first time you run XDS Plus, enter the path of the
printer discovery file. Select [XDS Plus: Options:
Preferences] in the Printers tab, and enter the directory
path of the printer registration file.
NOTE: What was previously known as the Seed File, is
now the Printer Discovery File Location.
Installing XDS Plus on Windows NT, 2000, and XP systems
This section details the installation instructions for the Xerox
Document Submission Plus (XDS Plus) software in order to
submit jobs to Xerox printers from a Windows NT 4.0, 2000,
or XP workstation.
Follow these steps to install the XDS Plus software, the
Xerox Job Ticket Converter tool, XDS Command Line, and
the XDS Printer Registration tool on Windows NT, 2000, or
XP.
NOTE: In order for XDS Plus to communicate with the
DocuSP controller, the IPP Gateway on the controller must
be installed and configured. Refer to the Help System for
DocuSP for instructions to configure the gateways.
1. To begin the installation process, do one of the following: