Installation Guide

Installation and configuration for XDS Plus
5-8 Installation Guide
13.On the Pre-Installation summary window, review the
settings and select [Install].
You may set up the printer discovery file from within XDS
Plus after installation. Refer to “Setting up the printer
discovery (printer.disc) file,” later in this document.
14.On the Install Complete window, select the [View
ReadMe] check box if you want to open the ReadMe file,
then select [Done].
15.Select another item to install, or select [Exit] to exit the
installation program, and reboot your system
16.Specify the printers that you will use with XDS Plus, using
the XDS Printer Registration tool to edit the printer
discovery file. Refer to “Setting up the printer discovery
(printer.disc) file,” later in this document, for the
procedure.
Installing XDS Plus on a Sun Solaris system
This section details the installation instructions for the Xerox
Document Submission Plus (XDS Plus) software in order to
submit jobs to Xerox printers from a Sun Solaris 2.6 or 2.8
workstation.
Follow these steps to install the XDS Plus software, the
Xerox Job Ticket Converter tool, XDS Command Line, and
the XDS Printer Registration tool on Solaris.
NOTE: These instructions assume a basic knowledge of
UNIX and using a Terminal window to perform general file
management functions.
NOTE: If XDS Plus for Solaris is installed as root, other users
may not be able to utilize XDS Plus unless the default
permissions are modified.
NOTE: In order for XDS Plus to communicate with the
DocuSP controller, the IPP Gateway on the controller must
be installed and configured.
CAUTION: If you do not specify placing the
XDS_Plus_Tool_Suite_<version> folder directly into your
home directory, i.e. /export/home/xrxusr, you may not be able
to access the XDS Plus files.
1. To begin the installation process, perform one of the
following: