Installation Guide

Installation and configuration for XDS Plus

Installation Guide 5-9

• Insert the Xerox Production Print Services (XPPS)

version 3.7x software CD ROM into the CD ROM drive

on your workstation.

a. In a terminal window from your home directory,

type:

cd /cdrom

<enter>

You should see the XPPS version. Take note of

this to enter the correct path below.

In a terminal window from your home directory, for

example, /export/home/xrxusr, type the following:

cp /cdrom/xpps_<version>/solaris/*.* ./

where version is separated by underscores, for

example 3.1.11 would be:

cp /cdrom/xpps_3111/Solaris/*.* ./

• Download the XPPS version 3.7x software from the

Internet.

a. Access the web site www.xerox.com. and select

the “Drivers” link.

b. In the [Search] text box labeled "Quick Search for

Drivers and Downloads", enter XDS Plus and

select [Search].

c. On the search results list, select the item

containing XPPS software version 3.7x for Sun

Solaris 2.6 and 2.8.

d. Download the install file named

xdsplus_install.bin to your home directory.

2. On a Terminal window, enter the following command to

set the execute permission for the installer. To verify the

filename, perform a directory list (ls) first.

For a CD install, type:

chmod +x XDSPlus_install.bin

For a web download install, type:

chmod +x XDSPlus_install.bin

3. Enter the following command on the Terminal window

command line to start the installation:

For a CD install, type:

./XDSPlus_install.bin