Installation Guide

Installation and configuration for XDS Plus
5-16 Installation Guide
2. Select [Add...].
3. In the Add Printer window, select IPP Printer or LPR
Printer and select [Next].
If LPR is selected, type in the IP address and queue
name, and select Printer Type. Select [Finish].
If IPP is selected, on the next window select either
DocuSP or Other. Select [Next]. Type in the IPP address,
and select [Next].
Enter the Host Name and IP address.
4. Select [Save] to save the new entry.
5. Repeat steps 3 through 5 for any additional printers that
you want to register. They must have controllers running
DocuSP 3.0 or higher, or NPS 8.0 or higher.
6. When finished, select [Exit].
Specifying the location of the printer discovery file for Windows
and Macintosh
In order for XDS Plus to locate the printer discovery file
(printer.disc) and access the connected printers, you must
specify the location of the printer discovery file. You can do
this from the Preferences window within XDS Plus. If you
move the printer discovery file on your workstation file
system, you must enter the new location in the Preferences
window.
To specify the location of the printer discovery file, perform
the following:
1. Open XDS Plus.
2. Select Options.
3. Select Preferences.
4. Select the Printers tab. In the Printer Discovery Location,
enter or browse to the location of the printer discovery file.
For Windows, enter file:\\\c:\Program Files\...
For Macintosh, enter file:\\\applications\...
Specifying location of the printer discovery file for Solaris only
To set user preferences, perform the following:
1. Go to [Start: Programs: Xerox Applications: XDS Plus
Tool Suite <version> : XDS Plus].