User's Manual

701P42180
July, 2004
XPPS 3.7.5x
3
14. On the Windows workstation, select Start, Settings, Printers.
15. Select Add Printer. The Add Printer wizard starts.
16. Select [Next>].
17. Select Local Printer
or Network Printer as appropriate for your environment, then select [Next>].
Note: Select Network Printer if you are printing through a print server or shared printer on another
computer, in which case you will be prompted to enter the network path. Otherwise, select Local
Printer.
18. Select [H
ave Disk...].
19. Type in or Browse to the Enu directory under the temporary location where you extracted the zip file.
Select the inf file and select [OK].
20. Select the appropriate Xerox printer and select [Next>]
21. If the system asks you to do so, select [Replace Existing Driver] and select [Next>].
22. If you selected Local Port in step 18, then select an appropriate port and select [N
ext >].
Note: Windows 95, 98, and ME do not include an LPR port by default. As a result you may need to
install TCP/IP or the LPR port monitor.
23. Change the printer name if desired. The printer name should easily identify the printer. If another
printer that is already installed has this name, enter a different name.
24. If desired, select [Yes] to make the selected printer the default for all Windows-based applications.
25. Select [Finish].
Installing the Xerox custom PostScript printer drivers for Windows NT
1. Open your web browser and type the following URL: http://www.xerox.com.
2. Click on “Support & Drivers” in the navigation bar.
3. Locate the section header for your printer type, either Color or Black and White.
4. Select the appropriate Product Family.
5. Find your printer model on the resulting list and just below it, click on Drivers & Downloads
.
6. Select the operating system.
7. Select the language.
8. Click on [GO].
9. Scroll down to Drivers.
10. Select the Xerox Customized PostScript Drivers link to download the file to a location on the hard
drive.