Datasheet

DocuMate 632 Scanner User’s Guide 105
Scanning from PaperPort
Setting Up Your Scanner to Work with PaperPort
When you selected a scanning option from the Scanner drop-down
list, such as TWAIN: Xerox DocuMate 632, WIA: Xerox
DocuMate 632, or ISIS: Xerox DocuMate 632 the Scan button at
the bottom of the panel should become active. If it doesn’t, you
need to set up your scanner to work with the selected option.
NOTE: Setting up your scanner is a one-time-only process for
each option from the Scanner drop-down list. Therefore, you
may have to set up your scanner once each for TWAIN: Xerox
DocuMate 632, WIA: Xerox DocuMate 632, and ISIS: Xerox
DocuMate 632. The setup process, described below, is the
same for each option. You will not have to set up the scanner
again for an option unless you uninstall the scanner and
PaperPort software, then re-install them.
If this Scan button is not active,
you need to set up your scanner.