Datasheet

DocuMate 632 Scanner User’s Guide 23
Scanning
Scanning
If you selected the recommended Full Install option for your
scanner’s driver (see page 11), then you have several different
scanning options with your Xerox DocuMate 632 scanner. Each
method scans equally well, so use the one with appropriate options
for the item you are scanning.
• Scanner Buttons—When you press either the Simplex or
Duplex button, documents are scanned using the scan settings
indicated by the LED number. The scanned images are then
sent to a software application (known as the Destination
Application) on your computer. See “Load and Scan
Documents” on page 24.
• One Touch—Use this scan option when you want to scan from
the computer screen. Open the One Touch scan panel and
window, adjust the scan settings as needed, put the document
in the scanner, then click the icon on the One Touch panel. Also
use this One Touch method of scanning if you want to access
the advanced features of Optical Character Recognition (OCR)
available from the OmniPage Pro application. See “Scan from
the One Touch Button Panel” on page 28.
• TWAIN Interface—This option uses your scanner’s TWAIN
interface to scan. Select scanning options before scanning, put
the document in the scanner, then click a button on the TWAIN
interface window. The PaperPort software that you installed for
your scanner uses the TWAIN interface for scanning, but many
other programs use it too so you can scan from them, as well
as from PaperPort. See “Scanning from the TWAIN Interface”
on page 87 and “Scanning with the Windows Image
Acquisition” on page 110.