Datasheet

Scanning
24 DocuMate 632 Scanner User’s Guide
Load and Scan Documents
When you press either the Simplex or Duplex button, documents
are scanned using the scan settings indicated by the LED number.
The scanned images are then sent to a software application
(known as the Destination Application) on your computer.
1. Adjust the paper guide for the width of paper.
2. Load the documents so the tops of the pages are inserted into
the Automatic Document Feeder.
For Simplex (one-sided) scans, load the documents face up. To
maintain the original order of the documents when they are
sent to the Destination Application, the scanner starts at the
first page and scans to the last page.
For Duplex (two-sided) scans, the documents can be face up or
down because both sides are scanned.
NOTE: Remove any staples or paper clips from the documents
before loading them into the Automatic Document Feeder.
Staples and paper clips can damage the feed mechanism.