Datasheet

DocuMate 632 Scanner User’s Guide 91
Scanning from PaperPort
4. Adjust the Brightness, Contrast, and Resolution until the
picture is what you want. You can also change the picture type
again, for example, from color to grayscale.
5. When you are satisfied with the preview image, remember to
place the document into the ADF again if you’re scanning a
stack of pages. Click Scan.
6. When you’re finished scanning items, click Done to close the
Basic Interface.
If the Create single page items check box is selected on the
PaperPort desktop, the item appears as a thumbnail on the
desktop.
If the Create single page items check box is not selected,
thumbnails do not appear until you indicate the scanning job is
finished.
See “The Create Single Page Items Check Box” on page 92.
7. On the PaperPort Scan message box, click Done.
When scanning is complete, thumbnail images appear on the
PaperPort Desktop.
NOTE: If you want to preview a stack of pages, use one of the
pages as a test page and load it into the scanner. Click the
Preview button and adjust the scanner settings. Then replace
the page on the stack at its original position and load the stack
into the scanner. Then just click the Scan button.
A thumbnail image of
the scanned item
appears on the
PaperPort desktop
The small icon
represents the file
format, in this case
the PaperPort format