User's Manual
Table Of Contents
- Safety
- Getting Started
- Installation and Setup
- Using the Services
- Printing
- Paper and Media
- Maintenance
- Troubleshooting
- Troubleshooting Overview
- General Troubleshooting
- Restarting the Printer
- Printer Fails to Power On
- Printer Resets or Powers Off Frequently
- Document Prints from the Wrong Tray
- Automatic 2-Sided Printing Problems
- Paper Tray Fails to Close
- Printing Takes Too Long
- Print Job Fails to Print
- Printer Makes Unusual Noises
- Condensation has Formed Inside the Printer
- Paper Curl
- Paper Jams
- Printing Problems
- Print-Quality Problems
- Copy and Scan Problems
- Fax Problems
- Getting Help
- Security
- Xerox® CentreWare® Internet Services
- Setting Access Rights
- Setting Print Permissions
- Device User Database
- Secure HTTP
- IP Filtering
- IPSec
- Security Certificates
- Concealing or Showing Job Names
- 802.1x
- Displaying or Hiding Network Settings
- System Timeout
- USB Port Security
- Restricting Access to the Web User Interface
- Software Verification Test
- Specifications
- Regulatory Information
- Recycling and Disposal
Loading Paper
Xerox
®
B215 Multifunction Printer
User Guide
185
2. To accommodate longer paper, press the paper tray
extender lever (1) and slide the lever to the desired
position. Press and slide the paper length guide (2) until
it lightly touches the end of the paper stack.
3. Position the width guide by pressing the lever and sliding
it towards the stack of paper, until it gently touches the
side of the stack.
4. Insert the paper tray into the printer.
5. After loading paper, if prompted, verify the paper size
and type settings on the screen. To keep the same
settings, touch No. To change the settings, touch Yes,
then adjust the settings:
• To select a paper size, touch Paper Size, then select
a size.
• To select a paper type, touch the Paper Type, then
select a paper type.
• To enable or disable the tray confirmation screen, touch Tray Confirmation, then select an
option.
To save the settings, touch Confirm.
6. When printing from your computer, ensure you select the Paper option in the print driver to
specify the correct paper size and type. Not confirming the paper details may result in printing
delays. For information about setting the paper type and size on the control panel, refer to Setting
Paper Size and Type.
Note: The settings made from the print driver on your computer override the settings on the
control panel.
1
2