User's Manual

Note
Always check inside the finisher for any individual staples or staple remnants.
1. Make sure that the machine has stopped printing.
2. Open the Right Cover on the finisher.
3. Grasp the Staple Cartridge handle located at (R1), and pull out the staple cartridge
from the finisher.
4. If necessary, raise the staple cartridge unit as shown and remove the jammed staple.
5. Move the lever on the rear of the staple cartridge unit in the downward direction.
Xerox
®
Color C60/C70 Printer13-38
User Guide
Standard/Booklet Maker Finisher