User's Manual

Recommended SolutionPossible CauseFault Code
Remove all paper from the stacker
tray.
The finisher stacker tray is full024-980
Remove all paper from the finisher
top tray.
The finisher top tray is full024-981
Remove all paper from the stacker
tray and remove any other obstruc-
tions.
The finisher stacker tray lower
safety warning is on
024-982
Remove all paper from the booklet
tray.
The finisher booklet tray is full024-983
Remove all paper from the booklet
tray.
The booklet stapler low staple
F signal is on
024-984
Remove all paper from the booklet
tray.
The booklet stapler low staple
R signal is on
024-985
Remove all paper from the tray. Set
the output tray for threefold.
The booklet folder tray is full024-987
Check that the folder tray is correctly
attached and set.
The booklet folder tray is full024-988
Check the staple cartridge and reset
correctly.
There is a problem with the
booklet maker stapler
024-989
Power Off/On the machine. If the er-
ror persists, contact the Customer
Support Center.
A communication error has
occurred with the Finisher
047-320
Remove and empty the waste contain-
er and reinstall.
Punch Waste Container is full
or near full
112-700
Confirm the staple position and try
to print again.
The settings for stapling are
canceled and prints the data
116-790
Confirm the punching position and
try to print again.
The settings for punching are
canceled
124-705
Confirm the folding settings and try
to print again.
The settings for folding are
canceled
124-706
Decrease the number of pages, or
cancel the stapling settings, then try
to print again.
The number of pages exceeds
the number of pages that can
be stapled
124-709
Xerox
®
Color C60/C70 Printer13-42
User Guide
Standard/Booklet Maker Finisher