Owner's Manual

Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
95
NetWare
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
• An existing operational NetWare network.
• Login to a NetWare file server/tree as Supervisor/Administrator or have the equivalent privileges.
• Ensure the device is connected to the network via Ethernet cable.
• Set up a print server object using NWADMIN. Refer to the documentation supplied by Novell to
complete this task. Record precisely (observe upper and lower case, dot notation) the NDS Tree,
NDS Context Name, frame type, Print Server Name and the Print Server password assigned. If your
printer services queues on multiple file servers, the Print Server name and password must be the
same on all file servers.
Configure NetWare Settings
1. At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2. Click on the [Properties] tab.
3. If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111],
and click on the [Login] button.
4. Click on the [Connectivity] link.
5. Click on the [Protocols] link.
6. Select [NetWare] in the directory tree.
7. In the General area:
a. For Protocol, check the [Enabled] checkbox to enable NetWare protocol.
b. Select the required [Filing Transport] from the drop-down menu.
c. Select the required [Frame Type] from the drop-down menu, selection for the frame type are
dependant upon the Physical Connection.
d. For [Queue Poll Interval], enter the queue poll interval in seconds. The range is from 1 - 240
seconds, and the default is 5.
e. Physical Connection displays physical network connection. This will display “Ethernet”.
f. External IPX Number displays the current IPX number.
g. Enter the NetWare logical name associated with the device in the [Printer Server Name]
field. The default name is based on the Ethernet MAC address.
h. Enter the print server password in the [New Print Server Password] field, then re-enter it in
the [Retype New Print Server Password] field.
i. Check the [Select to save new password] checkbox.
8. In the Service Advertising Protocol (SAP) area:
a. For Protocol, check the [Enabled] checkbox if you wish to enable SAP protocol.
SAP is used to inform other network devices about the device's available services. If SAP is
disabled, the device will not send out periodic SAP broadcast messages
b. Set the SAP periodic broadcast frequency in the [SAP Frequency] field. The range is from 15 -
300 seconds, or enter 0 for none. The default is 60.